Mitsubishi Electric Ecodan heat pumps are synonymous with Japanese reliability and outstanding performance at low outdoor temperatures. Zubadan technology maintains full heating output even far below freezing, making them an excellent choice for replacing a boiler in existing houses with radiator heating.
- Zubadan technology: full heating output down to approximately –15 °C outdoor temperature and operation down to approximately –28 °C.
- High seasonal efficiency and energy classes up to A+++.
- Very quiet outdoor unit operation, also suitable for densely built-up areas.
- Monobloc and split (hydrobox) versions, with or without an integrated domestic hot water cylinder; more environmentally friendly refrigerants of newer generations.
- Remote control and performance monitoring via the MELCloud application, and simple connection to a photovoltaic system.

Heat for your home. A system made to measure.
Ecodan connects the outdoor unit with heating and domestic water preparation. We choose a monobloc or split version and the indoor unit according to the temperature regime and the space available. Zubadan is a technology of selected outdoor units, not a label for all Ecodan systems.
We choose the brand and model according to your building, the heating temperature regime (underfloor or radiator) and your budget. Installation, commissioning and servicing are carried out by JB energija’s own team, and we connect the system to a solar power plant and a battery energy storage system.
Why Ecodan
Power on cold days
On certain models, Zubadan technology helps maintain heating output at low outdoor temperatures; we check the operating range in the technical data sheet of the selected model.
Seasonal efficiency
For certain models and temperature regimes, energy classes can reach A+++. We compare efficiency for your heating method.
Considered placement
We check the sound data of the selected model together with the location of the outdoor unit, the distances and the surroundings.
Made-to-measure version
Monobloc and split (hydrobox) versions, with or without an integrated domestic hot water cylinder; more environmentally friendly refrigerants of newer generations.
Control and your own energy
MELCloud enables remote control with a suitable interface. We check the options for connecting to a solar power plant according to the model and the control system.
Different series. Different needs.
An overview of the manufacturer Mitsubishi Electric. We check the specific version, equipment and availability when preparing the quote.
Ecodan R290
A version with the natural refrigerant R290 and a hydraulic connection to the building. We also consider it for renovations, where the required heating water temperature matters.
For selected models the manufacturer states a water temperature of up to 75 °C. We check the achievable temperature and output within the operating range of the specific model.
Ecodan R32
A family of units with versions adapted to the different needs of a building. We determine the monobloc or split connection and the indoor hydraulic unit at the design stage.
The hydrobox and the indoor unit with a domestic water cylinder address different space requirements; we check the suitability of the combination for the selected outdoor unit.
Zubadan technology
A technology for heating at low outdoor temperatures. It helps maintain heating output, but it does not mean the same efficiency in all conditions.
Zubadan is not an alternative to the terms monobloc and split. We check the connection type, refrigerant and temperature limits for the specific unit.
When Ecodan is a sensible choice
When renovating a home with radiators, we check the heating water temperature, the heat losses and operation at the lowest outdoor temperatures. For a new build, efficiency at a lower temperature regime also matters. We choose the series and version after a site visit; the properties listed are not the same for all models.
Heating system
We check what water temperature the existing radiators or underfloor heating require.
Space and noise
We determine the location of the outdoor and indoor units, the distances and the routing of the connections.
Connection to a solar power plant
We check the consumption management options according to the selected model and other equipment.
Related solutions
Turnkey heat pumps
A comparison of the different types and the installation process.
Home energy renovation
How to coordinate heating with a solar power plant and a storage system.
Let us choose an Ecodan for your building
We check your consumption, heat losses and heating system and prepare a design for your needs.
Answers to frequently asked questions
Is Ecodan suitable for existing radiators?
It can be. The decision is based on the building’s heat losses and the required water temperature; where necessary, we also check whether the heating surfaces need to be increased.
Does the same efficiency apply to all models?
No. Efficiency and output depend on the specific model, the outdoor temperature and the heating regime. The quote states the technical data of the selected system.
What do you check before the quote?
We inspect the building, insulation, heat emitters, consumption and installation space, and estimate the required heating output.










